Connecting With Amazon Alexa - Kalorik HUVI R1 Manual

• Press and hold the HOME button on top of
HUVI (Fig. B) until the HOME button light turns
light blue and begins to flash slowly while HUVI
says "connecting to network".
• Press the small circle in front of "Confirm the
indicator is blinking slowly" to select, then press
"Next" (Fig. J).
• Select "Go to Connect" in the app interface (Fig. K)
• You will be taken to the WiFi settings on your smart device. Wait for
the HUVI's WiFi hotspot to appear, then connect your smart device
to the HUVI's WiFi hotspot (Fig. L)
• On your smart device, return to the app. The app will show "Adding
device..." as the device connects.
• Once successful, you will be able to name your HUVI. Select "Done"
in the app to complete.
• Your HUVI can now be controlled through the HUVI app.
NOTE: If you cannot connect to WiFi using the connection methods above,
try the following before connecting again.
― Restart your smart device
― Reboot HUVI. Press and hold the power button for 3 seconds to
turn off. Wait 10 seconds, the press and hold the power button for
3 seconds again to turn back on.
Reboot your router by unplugging the router for 30 seconds, then
―
reconnecting. Allow the router a few minutes to reboot

Connecting with Amazon Alexa

HUVI is compatible with Amazon Echo's Alexa. Follow the steps below to
connect:
1. Make sure your Amazon Echo (or compatible smart speaker/appliance)
is set up and that the Amazon Alexa app is downloaded and connected
to your Amazon Echo.
2. Make sure you have downloaded and successfully connected HUVI to
the HUVI app. Make sure it is connected to the same WiFi signal as the
Alexa app.
3. In the HUVI app, go to the HUVI's control screen and select the
in the upper right corner (Fig. M).
www.KALORIK.com
15
Fig. L
.
icon
211104