Kalorik HUVI R1 Manual page 11

NOTE: HUVI is suitable for hardwood floors, tile, low pile carpet/rugs. HUVI
includes 2 unique sets of side arm brushes, each designed to tackle
different floor types and handle any room in your home.
― 6-ARM SET: designed for hard floors and whole-room carpeting,
permanently fixed onto the floor. The six-arm design provides more
lifting power for dust and hair, providing more efficient deep
cleaning on these surfaces.
― 3-ARM SET: The 3-Arm Set is designed for homes with small or light
rugs. The three-arm design makes it easier for HUVI to climb over
these surfaces and move freely across the floor. It is recommended
to use this set to avoid HUVI getting stuck on the sides of your
carpets or from moving your rugs around while cleaning.
• Place HUVI on the charging station by lining up the metal charging
contacts.
• Turn on your HUVI by pressing and holding the power button for 3-5
seconds.
• When successfully powered on, the power button lights up in blue.
• Allow HUVI to charge on the base. While charging, the indicator lights
on the POWER & HOME buttons flashes white. Once fully charged, the
lights stop flashing.
• Download the HUVI App and follow the instructions for complete set-
up. See CONNECTING TO THE HUVI APP section in this manual for more
information.
NOTE:
― Make sure HUVI is close to your WiFi router when connecting to the
HUVI app for the first time.
www.KALORIK.com
HOME BUTTON
POWER BUTTON
11
211104