Kalorik HUVI R1 Manual page 20

• Set the condition you wish HUVI to run under (Fig. K).
― "Launch Tap-to-Run" allows you to set commands for HUVI
which HUVI will follow with one touch on the app.
― "When weather changes" allows you to set commands for
HUVI, depending on the weather.
― "Schedule" allows you to set a schedule for HUVI to perform
specific tasks.
― "When the device status changes" allows you to set
commands for HUVI, depending on HUVI's status. For example,
you can direct HUVI to return to the charging base depending
on the filter life.
Fig. I
After setting a condition, select a task for HUVI (Fig. L) and follow the
•
onscreen instructions.
"Run the device" allows you to select which HUVI functions
o
to enable when automating.
"Select Smart" allows you to select an Automation or Tap-to-
o
Launch that you have previously created.
"Send notification" will send a notification to your smart
o
device when the condition you set is met.
"Delay" allows you to delay the start of the automation by a
o
specific amount of time.
• After setting a task, you can add further conditions/tasks to your
automation if you desire. When ready, select "Save" to finalize (Fig.
M).
NOTE: Once created, "Automations" can be found by selecting
"Automations" in the Smart Screen (Fig. N). "Tap-to-Run" commands
www.KALORIK.com
Fig. J
20
Fig. K
211104