Cleaing The Side Brushes; Replacing The Battery - Kalorik HUVI R1 Manual

CLEANING THE SIDE BRUSHES
For optimal performance, clean the side brushes after a month of regular
use. Follow the instructions below to clean the side brushes.
• Remove the side brushes from the vacuum.
• Carefully remove any debris wrapped between the main unit and the
side brushes.
• Use a cloth dampened with warm water to remove any dust from the
brushes or to gently reshape them.
NOTE: the side brushes may slightly deform with regular use.

REPLACING THE BATTERY

• Use a screwdriver to remove the screws from the battery cover under
HUVI. Remove the battery from the compartment.
• Disconnect the battery from the connector, then fully remove the
battery.
www.KALORIK.com
25
211104