Omntec OEL8000II Installation Manual page 91

Note: To return to the MAIN Menu from the Sensor Submenu, select EXIT and then
press the MENU key. The LCD returns to Screen #1 of the MAIN Menu (see Figure
4-3a).
Field Descriptions
♦ CONFIG – select this field to enter the Config Submenu. It searches for all system
sensors and prompts you to provide labels.
♦ TEST/DEL – select this field to enter the Test Submenu. It allows for testing all
system sensors, setting priority, and deleting sensors from the configuration.
♦ EXIT – select this field to return to Screen #1 of the SETUP Submenu.
Printing
While in the Sensor Submenu, you can obtain a hardcopy printout by pressing the
PRINT key. This will also test each sensor and provide the results in the printout.
The printout (see Figure 4-8b) provides the sensor number, serial number, part
number, tank number, label number, priority, alarm, warning, and test results.
Installation Manual
System Response
The screen will appear as in Figure 4-8a.
Lines 2 and 3 are blank.
Line 3 shows a cursor.
Line 4 has a new set of fields.
TU 02/06/07 15:24:31
CONFIG |
Fig. 4-8a: Sensor Submenu
*STATUS:SETUP
|TEST/DEL |EXIT
OEL8000II
4-29