Site Address Line 1; Site Address Line 2; Site City - Omntec OEL8000II Installation Manual

Programming
2. While in the Set the drop report dwell time screen, select ENTER.
4.3.3.4
1. Enter the first line of the site address (maximum of 20 characters).
2. Select ENTER.
4.3.3.5
1. Enter the second line of the site address (maximum of 20 characters). If there is
2. Select ENTER.
4.3.3.6
1. Enter the city (maximum of 20 characters).
4-10
Note: The system permits you to enter two lines for site address. Only the street
address is entered into site address line 1 and site address line 2. There are
separate screens for city, state, and zip code.
System Response
Lines 1 and 4 of Figure 4-6 remain unchanged.
Line 2 reads: Enter the site address line 1.
Line 3 displays a cursor.

Site Address Line 1

System Response
The address will appear on line 3.
System Response
Lines 1 and 4 of Figure 4-6 remain unchanged.
Line 2 reads: Enter the site address line 2.
Line 3 displays a cursor.

Site Address Line 2

none, leave Line 3 blank and select ENTER.
System Response
The address will appear on line 3.
System Response
Lines 1 and 4 of Figure 4-6 remain unchanged.
Line 2 reads: Set the site city.
Line 3 displays a cursor.

Site City

System Response
The city will appear on line 3.
®
OMNTEC Mfg., Inc.