Com2 - Omntec OEL8000II Installation Manual

3. Select MORE to view additional options in second screen.
4. Enter a number and select ENTER.
4.3.9.1.2
1. Select COM2 in the Serial Submenu (see Figure 4-14b).
2. To perform RS232 Port Check, press the TEST key.
Installation Manual
TU 02/06/07
0:None,
1
ENTER
Note: Select MORE again to return to the first screen.
System Response
Lines 1, 3, and 4 remain unchanged..
Line 2 displays additional options: 4:9600DIS, 5:r200 DATA.
System Response
The LCD displays the Serial Submenu (see Figure 4-14b).
Lines 1 and 4 remain unchanged.
Lines 2 and 3 display: Make a Selection or Press Menu to Exit
Setup.

COM2

System Response
The screen will appear as in Figure 4-14e.
TU 02/06/07
COMM 2 MENU
Select EXT. DEV to Set Output Type
EXT. DEV |SETUP
15:24:31 *STATUS:SETUP
1:DAC-BB, 2:MSS2,
|EXIT |
Fig. 4-14d: COM1 – Ext. Dev.
15:24:31 *STATUS:SETUP
(TEST = RS232 Port Check)
|ECHO CMD |BACK
Fig. 4-14e: COM2
OEL8000II
3:2400DIS...
|MORE
4-53