Tank Identification; Level Probe - Enable/Disable - Omntec OEL8000II Installation Manual

Programming
4.3.4.1b
1. Enter the tank number.
2. Select ENTER.
Field Descriptions
♦ ENTER – select this field to save entered data and to advance to the next screen.
♦ EXIT – returns to Screen #1 of the SETUP Submenu.
♦ PRINT – provides a hardcopy printout of Tank Data.
♦ PREV – returns to previous screen.
Note: All of the data entries that follow pertain to the tank number identified in this
section.
4.3.4.2
This section permits you to enable or disable the level probe associated with the tank
you identified in the previous section. Line 3 displays the currently programmed
value. If you want to keep this value, skip to Step 3.
1. Press the DEL key to erase the old value.
4-16
applicable changes.

Tank Identification

System Response
The tank number appears on line 3.
System Response
The screen will appear as in Figure 4-7c.
Line 1 remains unchanged.
Line 2 reads: Enable/Disable level probe, E/D.
Line 3 shows current probe status (E or D).
Line 4 has a new set of fields.
TU 02/06/07
Enable/Disable level probe, E/D
E
ENTER
Level Probe – Enable/Disable
15:24:31 *STATUS:SETUP
|EXIT |PRINT
Fig. 4-7c: Tank Data
|PREV
®
OMNTEC Mfg., Inc.