Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Omntec Manuals
  4. Measuring Instruments
  5. Proteus Series
  6. Programming manual

Omntec Proteus Series Programming Manual

Tank gauging system
Hide thumbs Also See for Proteus Series:

Advertisement

Quick Links

Download this manual
OEL8000III-K/X
WEB PAGE PROGRAMMING MANUAL
Software Release 4.0 to 8.3
OMNTEC Mfg., Inc. | 2420 Pond Road | Ronkonkoma | NY 11779 | (631) 981-2001 | Email: omntec@omntec.com | www.omntec.com
PROTEUS
TANK GAUGING SYSTEM
Revision 2315
Document No. DI00014 DI00015 DI00020-5
OMNTEC Mfg., Inc. has been certified
by DQS Inc. to ISO 9001:2015
1. Open the camera app
2. Focus the camera on
the QR code by gently
tapping the code
3. Follow the instructions
on the screen to view
PDF file
Series
®

Advertisement

loading

Related Manuals for Omntec Proteus Series

Summary of Contents for Omntec Proteus Series

  • Page 1 TANK GAUGING SYSTEM Revision 2315 Document No. DI00014 DI00015 DI00020-5 OMNTEC Mfg., Inc. has been certified by DQS Inc. to ISO 9001:2015 OMNTEC Mfg., Inc. | 2420 Pond Road | Ronkonkoma | NY 11779 | (631) 981-2001 | Email: omntec@omntec.com | www.omntec.com...
  • Page 2 Shows SD card • Date appears in reports Release 4: • Inventory & alarms OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 2 of 26 Rev Date: 4-18-2023...

  • Page 3: Connecting To The Web Page

    In your web browser’s URL address field (e.g., Internet Explorer, Chrome, Firefox, etc.) type in your controller’s IP address. Press ENTER or the GO TO arrow (→) to the right of the URL field. The OMNTEC Proteus web page will open.
  • Page 4 Press the UP (↑) or DOWN (↓) arrows (right side) to scroll through the tank numbers. B. Press the ALARMS button. This shows the ATG’s current alarms. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com...
  • Page 5 D. Press the SENSORS button. This shows the state of the ATG’s currently connected sensors. Sensors in red are in an alarm state. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 5 of 26 Rev Date: 4-18-2023...
  • Page 6 SHIFT: This log shows daily shift inventory reports for the current month. VLD: The VLD (volumetric liquid detection) leak test results for the current month. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com...
  • Page 7 INPUT: This log shows input events for any input that is programmed to LOG INPUT in the “Input Mode” selection. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 7 of 26 Rev Date: 4-18-2023...
  • Page 8 ARCHIVE shows older logs by year, then by month. F. Press the SETUP button to program the Proteus ATG. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 8 of 26 Rev Date: 4-18-2023...

  • Page 9: System Setup Menu And Features Settings

    Type in the ATG’s password (the same password used to enter setup on the Proteus ATG). c) Press the login button to access the corresponding system setup options. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com...
  • Page 10 Proteus printer; selecting TCP/IP printer will use printer linked to the same network as the Proteus ATG. Put the printer’s IP address and port number in the fields provided. Click on Update to save any changes. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com...
  • Page 11 Click on Update to save any changes. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 11 of 26 Rev Date: 4-18-2023...
  • Page 12 (Printing for Proteus K & X only). Click on Update to save any changes. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 12 of 26 Rev Date: 4-18-2023...
  • Page 13 Probe Temp Low: Temperature needed to activate probe low temp alarm. Click on Update to save any changes. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 13 of 26 Rev Date: 4-18-2023...
  • Page 14 Note: Not required if MTG probe is located in the center of the tank or if the tank is level. Click on Update to save any changes. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com...
  • Page 15 Print Status on Shift Report: Enables/Disables sensor status for shift report. Click on Update to save any changes. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 15 of 26 Rev Date: 4-18-2023...
  • Page 16 Parity: Selections available are none, odd, and even. e) Stop Bits: Selections available 1 or 2. f) Comm Type: 4 Selections available: Remote (OMNTEC PC, Mini-Me with RS-232, or industry standard protocol), Modbus, RD-625, or RD7CTS (Mini-Me with RS-485).
  • Page 17 ® OEL8000III Series WEB PAGE PROGRAMMING MANUAL Press the MODBUS button. Here you can enable and setup MODBUS with an OMNTEC-purchased enable code. a) Modbus Address: Unique Modbus Slave Address. b) Register Offset: Holding register offset, typically set to 0 or 40001.
  • Page 18 RESTORE to load the latest system parameter data. NOTE: THIS WILL OVER-WRITE ALL CURRENT SYSTEM SETTINGS. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 18 of 26 Rev Date: 4-18-2023...
  • Page 19 If you have a delivery before a VLD test, you must wait at least 4-8 hours (dependent on tank size) before the start of the test. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com...
  • Page 20 Takes 20-minute time intervals to determine if the tank has a leak and will generate a monthly report. a) CITLD Enable Code: Need an enable code from OMNTEC to run this optional feature. b) Auto Print Enable: Enables the unit to print out the CITLD results automatically (at the end of the month).
  • Page 21 Light Mode: Use the relay to turn on a light. Blinks on test mode. c) Horn Mode: Use the relay to turn on a horn. Sounds on test. Can be acknowledged. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com...
  • Page 22 INPUT SETTINGS button. Does not function on MCU versions MCU-P2AK and earlier. More details are forthcoming. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 22 of 26 Rev Date: 4-18-2023...
  • Page 23 Input Events: If enabled, a report will be sent for each input that because active that has “email on input” checked. Click on Update to save any changes. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 23 of 26 Rev Date: 4-18-2023...

  • Page 24: Navigating To Setup (Proteus Atg Gui)

    Home Screen: The SETUP MENU is located under UTILITIES. (See Figure 1.1) Figure 1.1 OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 24 of 26 Rev Date: 4-18-2023...
  • Page 25 To change the password: Go to Section 5; Miscellaneous Settings. Figure 1.3 OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 25 of 26 Rev Date: 4-18-2023...

  • Page 26: Network Properties (Proteus Atg Gui)

    Telnet Ports: The default telnet ports are set to 502 for Modbus TCP and 4001, 8001, and 10001 for Remote. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: DI00014 DI00015 DI00020-5 rev2315.docx 26 of 26 Rev Date: 4-18-2023...

This manual is also suitable for:

Oel8000iii-kOel8000iii-x