Dantherm RCV 320 P2 Basic Manual page 34

Floor mounting
34
Follow these steps, when mounting the RCV 320 on the floor.
Step Action
1 Install the Dantherm approved floor brackets (accessory) on the RCV unit to ensure
that the system is raised from the floor in a safe manner.
!
Note: Dantherm accepts no liability to floor brackets from other suppliers. Use of
other (non-Dantherm) constructions is at your own risk.
2 Place the unit on the con-
struction and make sure it is
levelled.
CAUTION
Warning
If the unit tilts forwards,
there is a risk of water
damage .
Caution
• Make sure the unit is lev-
elled or tilts backwards.
INSTALLATION & SERVICE MANUAL FOR PROFESSIONALS
Illustration
Installation: Mounting the device