Installation; Location Considerations - Dantherm RCV 320 P2 Basic Manual

INSTALLATION & SERVICE MANUAL FOR PROFESSIONALS
Installation: Location Considerations

Location Considerations

Warranty claims
Use of an appliance outside the specified conditions and contrary to its intended use will re-
sult in loss of all warranty claims. The warranty is limited to devices installed solely by trained
and certified personnel.
Location
The following should be considered when selecting the appropriate location for installation:
requirements
• Confirm whether installation mode A (default) or B (optional) is possible at the installation
• RCV 320 basic units are designed to be installed in environments with temperatures
• Provide additional space to ensure proper installation and service access (see "Positioning
• Ensure that the wall structure is sufficient to support the weight of the unit regardless of
Positioning the
Minimum space always required for service access (top view):
device

Installation

site. If mode B is preferred, follow the replacement procedure on page 29.
Note: The function for switching between modes A and B allows the duct pair (outside or
inside) to be directed towards the unit from the left OR right according to the construc-
tion of the building and room. See the difference between the two modes in the "General
description" on page 17f.
>+12 °C. The compact design allows the RCV unit to be placed in e.g. heated utility rooms
with only a little space
the device" on page 31).
the wall bracket type.
5 mm
Min.
Min. 800 mm
Fig. 11
Min.
5 mm
31