僅 Operating High Beam - Kia FORTE 2022 Manual

Features of your vehicle
CAUTION
僅 Never place anything over the sensor
(1) located on the instrument panel as
this will ensure better auto-light sys-
tem control.
僅 Don't clean the sensor using a window
cleaner, the cleaner may leave a light
film which could interfere with sensor
operation.
僅 If your vehicle has window tint or
other types of metallic coating on the
front windshield, the Auto light system
may not work properly.
Operating high beam
OSP2049037
To turn on the high beam headlamp:
僅 Push the lever away from you.
The lever will return to its original
position.
The high beam indicator will light
when the headlight high beams are
switched on.
WARNING
Do not use high beam when there are
other vehicles. Using high beam could
obstruct the other driver's vision.
To flash the headlights:
僅 Pull the lever towards you.
OSP2049036
It will return to the normal (low beam)
position when released. The head-
light switch does not need to be on to
use this flashing feature.
Operating turn signals and lane
change signals
OBD041679N
The ignition switch or the ENGINE
START/STOP button must be on for the
turn signals to function.
To turn on the turn signals:
僅 Move the lever up or down (A).
The green arrow indicators on the
instrument panel indicate which turn
signal is operating.
They will self-cancel after a turn is
completed. If the indicator continues
Lighting
4
4 87