Table of Contents
Advertisement
Driving your vehicle
reduce your driving speed in order to
maintain a safe distance.
Smart Cruise Control conditions
not satisfied
OBD041243L
If the Driving Assist button, +, - or
switch is pushed when Smart Cruise
Control's operating conditions are not
satisfied, the 'Smart Cruise Control con-
ditions not met' will appear on the clus-
ter, and an audible warning will sound.
In traffic situation
OMQ4050288L
In traffic, your vehicle will stop if the
vehicle ahead of you stops. Also, if the
vehicle ahead of you starts moving, your
vehicle will start as well. In addition, after
5
108
the vehicle has stopped and a certain
time has passed, the 'Use switch or
pedal to accelerate' message will appear
on the cluster. Depress the accelerator
pedal or push the + switch, - switch or
switch to start driving.
WARNING
While the message is displayed on the
cluster, if there is no vehicle in front or
the vehicle is far away from you, and the
+ switch, – switch or
pushed, Smart Cruise Control will auto-
matically cancel and the EPB will be
applied. However, if the accelerator
pedal is depressed, EPB will not be
applied even though Smart Cruise Con-
trol is canceled. Always pay attention to
the road condition ahead.
Warning road conditions ahead
OBD041244L
In the following situation, the 'Watch for
surrounding vehicles' warning message
will appear on the cluster, and an audi-
ble warning will sound to warn the driver
of road conditions ahead.
The vehicle in front disappears when
Smart Cruise Control is maintaining the
distance with the vehicle ahead while
driving in low speed.
Smart Cruise Control (SCC)
switch is
Advertisement
Table of Contents
