Table of Contents
Advertisement
Maintenance
4. Stop lamp (LED type)
5. Tail lamp (LED type)
6. Side marker (LED type)
7. Rear turn signal lamp (Bulb type)
8. Back Up lamp (Bulb type)
9. License plate lamp (Bulb type)
10.High mounted stop lamp (Bulb or LED
type)
Light bulb position (Side)
Side repeater lamp
OBD071038
1. Side repeater lamp (LED type)
Headlamp (High/Low) (Bulb
type) bulb replacement
Head lamp Type A
OBD071216
1. Open the hood.
7
62
2. Remove the headlamp bulb cover by
turning it counterclockwise.
3. Disconnect the headlamp bulb
socket-connector.
4. Remove the bulb-socket from the
headlamp assembly by turning the
bulb-socket counterclockwise until
the tabs on the bulb-socket align with
the slots on the headlamp assembly.
5. Install a new bulb-socket assembly in
the headlamp assembly by aligning
the tabs on the bulb-socket with the
slots in the headlamp assembly. Push
the bulb-socket into the headlamp
assembly and turn the bulb-socket
clockwise.
6. Connect the headlamp bulb socket-
connector.
7. Install the headlamp bulb cover by
turning it clockwise.
Headlamp bulb
OJA070102
WARNING
Halogen bulbs
僅 Halogen bulbs contain pressurized
gas that will produce flying pieces of
glass if broken.
僅 Always handle them carefully, and
avoid scratches and abrasions. If the
bulbs are lit, avoid contact with liq-
Light bulbs
Advertisement
Table of Contents
