Table of Contents
Advertisement
Driving your vehicle
set speed and the highway (or motor-
way) speed limit is matched.
僅 While Set Speed Auto Change func-
tion is operating, when the highway
(or motorway) speed limit changes,
Smart Cruise Control set speed auto-
matically changes to the changed
speed limit.
僅 If Smart Cruise Control set speed is
adjusted different from the speed
limit, Set Speed Auto Change function
will be in the standby state.
僅 If Set Speed Auto Change function
has changed to the standby state by
driving on a road other than the high-
way (or motorway) main road, Set
Speed Auto Change function will
operate again when you drive on the
main road again. At this time, the set
speed does not need to be adjusted.
僅 If Set Speed Auto Change function
has changed to the standby state by
depressing the brake pedal, press the
switch to restart the Highway Set
Speed Auto Change function.
僅 Set Speed Auto Change function does
not operate on highway interchanges
or junctions.
NOTICE
僅 Set Speed Auto Change function only
operates based on the speed limits of
the highway (or motorway), but it
does not work with the speed cam-
eras.
僅 When Set Speed Auto Change func-
tion is operating, the vehicle automati-
cally accelerates or decelerates when
the highway (or motorway) speed
limit changes.
僅 If the speed limit is higher than the
speed limit of the speed camera while
Set Speed Auto Change function is
5
118
Navigation-based Smart Cruise Control (NSCC)
operating, an audible warning may
sound.
僅 The maximum set speed for Set
Speed Auto Change function to oper-
ate is 90 mph (140 km/h).
僅 If the speed limit of a new road is not
reflected in the navigation, Set Speed
Auto Change function may not oper-
ate properly.
僅 If the speed unit is set to a unit other
than the speed unit used in your state,
Set Speed Auto Change function may
not operate properly.
Limitations of Navigation-based
Smart Cruise Control
Navigation-based Smart Cruise Control
may not operate properly under the fol-
lowing circumstances:
僅 The navigation is not working prop-
erly.
僅 The navigation is not updated to
include the latest information about
road curvature and changes.
僅 Speed limit and road information in
the navigation is not updated
僅 The map information and the actual
road is different because of real-time
GPS data or map information error
僅 The navigation searches for a route
while driving
僅 GPS signals are blocked in areas such
as a tunnel
僅 A road that divides into two or more
roads and joins again
僅 The driver goes off course the route
set in the navigation
僅 The route to the destination is
changed or canceled by resetting the
navigation (including TPEG change)
僅 The navigation cannot detect the cur-
rent vehicle position (for example, ele-
Advertisement
Table of Contents
