Table of Contents
Advertisement
Safety features of your vehicle
sound. This indicates that the retrac-
tor is in the "Automatic Locking"
mode. If no distinct sound is heard,
repeat steps 3 and 4.
ODEEV058044NR
5. Remove as much slack from the belt
as possible by pushing down on the
child restraint system while feeding
the shoulder belt back into the retrac-
tor.
6. Push and pull on the child restraint
system to confirm that the seat belt is
holding it firmly in place. If it is not,
release the seat belt and repeat steps
2 through 6.
7. Double check that the retractor is in
the "Automatic Locking" mode by
attempting to pull more of the seat
belt out of the retractor. If you cannot,
the retractor is in the "Automatic
Locking" mode.
If your CRS manufacturer instructs or
recommends you to use a tether anchor
with the lap/shoulder belt, refer to
"Securing a child restraint with the
LATCH anchors system" on page 3-30.
Child Restraint System (CRS)
NOTICE
When the seat belt is allowed to retract
to its fully stowed position, the retractor
will automatically switch from the "Auto-
matic Locking" mode to the emergency
lock mode for normal adult usage.
WARNING
Auto lock mode
Set the retractor to Automatic Lock
mode when installing any child restraint
system. If the retractor is not in the Auto-
matic Locking mode, the child restraint
can move when your vehicle turns or
stops suddenly.
To remove the child restraint, press the
release button on the buckle and then
pull the lap/shoulder belt out of the
restraint and allow the seat belt to
retract fully.
3
3
33
Advertisement
Table of Contents
