Table of Contents
Advertisement
Features of your vehicle
Auto down window (for driver's
window) (if equipped)
OBD041405L
Pressing the power window switch
momentarily to the second detent posi-
tion (6) completely lowers the window
even when the switch is released. To
stop the window at the desired position
while the window is in operation, pull up
the switch momentarily to the opposite
direction of the window movement.
Auto up/down window (for
driver's window) (if equipped)
OBD041085
Pressing or pulling up the power window
switch momentarily to the second detent
position (6) completely lowers or raises
the window even when the switch is
released. To stop the window at the
desired position while the window is in
4
32
operation, pull up or press down and
release the switch.
To reset the power windows
If the power window does not operate
normally, the automatic power window
system must be reset as follows:
1. Turn the ignition switch or ENGINE
START/STOP button to the ON posi-
tion.
2. Close the window and continue pull-
ing up the power window switch for at
least 1 second after the window is
completely closed.
Automatic reversal (for Auto up/
down window) (if equipped)
OJA040552
If the upward movement of the window
is blocked by an object or part of the
body, the window will detect the resis-
tance and will stop upward movement.
The window will then lower approxi-
mately 30 cm (11.8 inches) to allow the
object to be cleared.
If the window detects the resistance
while the power window switch is pulled
up continuously, the window will stop
upward movement then lower approxi-
mately 2.5 cm (1 inch).
And if the power window switch is pulled
up continuously again within 5 seconds
Windows
Advertisement
Table of Contents
