Table of Contents
Advertisement
Maintenance
Engine oil and filter
Checking the engine oil level
Engine oil is used for lubricating, cooling,
and operating various hydraulic compo-
nents in the engine. Engine oil consump-
tion while driving is normal, and it is
necessary to check and refill the engine
oil regularly. Also, check and refill the oil
level within the recommended mainte-
nance schedule to prevent deterioration
of oil performance.Check the engine oil
following the below procedure.
(Gasoline) 2.0 MPI
OBD078103L
(Gasoline) 1.6 T-GDi
OBD078124L
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach
normal operating temperature.
3. Turn the engine off, remove the oil
filler cap and pull the dipstick out.
Wait for 15 minutes for the oil to
return to the oil pan.
4. Wipe the dipstick clean and re-insert it
fully.
5. Pull the dipstick out again and check
the level. Check if the oil level is
between the F-L line, and if it is below
the L line, add enough oil to bring the
level to F line.
WARNING
Radiator hose
Be very careful not to touch the radiator
hose when checking or adding the
engine oil as it may be hot enough to
burn you.
CAUTION
When you wipe the oil level gauge, you
should wipe it with a clean cloth. When
mixed with debris, it can cause engine
damage.
(Gasoline) 2.0 MPI
OON071003
Engine oil and filter
7
7
21
Advertisement
Table of Contents
