Table of Contents
Advertisement
Features of your vehicle
僅 Never rely solely on the rear view
monitor. As there are blind spots that
do not appear on the camera while
backing up and parking, You must
always use methods of viewing the
area behind you including looking
over both shoulders as well as contin-
uously checking all three rear view
mirrors.
僅 Always look around your vehicle to
make sure there are no objects or
obstacles before moving the vehicle in
any direction to prevent a collision.
僅 Always pay close attention when the
vehicle is driven close to objects, par-
ticularly pedestrians, and especially
children.
僅 If the camera lens is covered with for-
eign material, the Rear View Monitor
may not operate normally.
Always keep the camera lens clean.
However, do not use chemical sol-
vents such as strong detergents con-
taining high alkaline or volatile
organic solvents (gasoline, acetone
etc.). This may damage the camera
lens.
Reverse Parking Distance Warning (PDW)
Reverse Parking Distance
Warning (PDW) (if equipped)
Reverse Parking Distance Warning will
warn the driver if an obstacle is detected
when the vehicle is backing up at low
speeds.
Detecting sensors
OBD041415
[1] : Rear ultrasonic sensors
Refer to the picture above for the
detailed location of the detecting sen-
sors.
WARNING
僅 Reverse Parking Distance Warning
may not operate normally when:
- Moisture is frozen on the sensor
- Sensor is covered with foreign mat-
ters, such as snow or water
- Outside air temperature is
extremely hot or cold.
- Sensor components are arbitrarily
removed.
- The sensor is pushed, scratched or
stuck with any hard and sharp
objects that could damage the sur-
face.
- High pressure water is directly
applied to ultrasonic sensor.
4
4
81
Advertisement
Table of Contents
