Table of Contents
Advertisement
Maintenance
5. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
6. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
7. Install the liftgate lid cover.
Stop and tail lamp (LED type)
bulb replacement
Rear combination lamp - Type B
OBD071214N
If the stop (1) and tail (2) lamp (LED),
does not operate, have the vehicle
checked by an authorized Kia dealer.
The LED lamps cannot be replaced as a
single unit because it is an integrated
unit. The LED lamps has to be replaced
with the unit.
A skilled technician should check or
repair the stop and tail lamp (LED), for it
may damage related parts of the vehicle.
Side marker (LED type) bulb
replacement
Rear combination lamp - Type B
OBD071195N
If the side marker (LED) (1) does not
operate, have the vehicle checked by an
authorized Kia dealer. The LED lamp
cannot be replaced as a single compo-
nent because it is an integrated unit. The
LED lamp has to be replaced with the
unit. A skilled technician should check or
repair the side marker (LED), for it may
damage related parts of the vehicle.
Rear turn signal lamp (Bulb type)
bulb replacement
OBD078128L
If the rear turn signal lamp (1) does not
operate, have the vehicle checked by an
authorized Kia dealer.
Light bulbs
7
7
67
Advertisement
Table of Contents
