Intended Use - Optimum OPTI turn TU 3008G Operating Manual

Switching on forbidden!
Wear protective gloves!
Protect the environment!
1.3

Intended use

WARNING!
Improper use of the lathe will result in

will endanger personnel,

will endanger the lathe and other material property of the operator,

the correct function of the lathe may be affected.
The lathe is designed and manufactured to be used in environments where there is no potential
danger of explosion.
The lathe is designed and manufactured for longitudinal and straight turning of round and
regular formed
three-, six- or twelve-square workpieces in cold metal. The lathe must only be installed and
operated in a dry and ventilated place.
If the lathe is used in any way other than described above, or modified without the approval of
Maschinen Germany GmbH, then the lathe is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in
accordance with the intended use.
We expressly point out that the guarantee or CE conformity will expire, if any constructive,
technical or procedural changes are not performed by the company Optimum Maschinen
Germany GmbH.
It is also part of the intended use that you
observe the limits of the lathe,

observe the operating instructions,

and comply with the inspection and maintenance instructions.


Technical specification on page 16
In order to achieve optimum cutting performance, it is essential to choose the right turning tool,
feed, tool pressure, cutting speed and coolant.
WARNING!
Extremely severe injuries due to non-intended use.
It is forbidden to make any modifications or alternations to the operation values of the
lathe. They could endanger the personnel and cause damage to the lathe.
GB TU3008G
8
Do not clean with
compressed air!
Wear safety shoes!
Contact address
Translation of original instruction
Read the operating
instructions before
commissioning!
Wear a protective suit!
Wear protective glasses!
Use ear protection!
Safety
Version 1.1.6 - 2021-9-17