Safety; Rating Plate - Optimum OPTI turn TU 3008G Operating Manual

1

Safety

Glossary of symbols
provides further instructions


calls on you to act
listings

This part of the operating instructions
explains the meaning and use of the warning notes included in these operating instructions,

defines the intended use of the lathe,

defines the target group of the lathe,

points out the dangers that might arise for you or others if these instructions are not

observed,
informs you about how to avoid dangers.

In addition to these operation instructions, please observe
the applicable laws and regulations,

the statutory provisions for accident prevention,

the prohibition, warning and mandatory signs as well as the warning notes on the lathe.

European standards must be observed during the installation, operation, maintenance and
repair of the lathe.
If European standards have not yet been incorporated in the national legislation of the country
of destination, the specific applicable regulations of each country must be observed.
If applicable, necessary measures must be taken to comply with the country-specific
regulations before commissioning the lathe.
Always keep this documentation close to the lathe.
If you would like to order another operating manual for your machine, please indicate the serial
number of your machine. The serial number is located on the type plate.
1.1

Rating plate

INFORMATION
If you are unable to rectify an issue using these operating instructions, please contact us for
advice:
Hare & Forbes Machineryhouse
Unit 1,2 Windsor Road
Northmead NSW 2152
sales@machineryhouse.com.au
Email:
GB TU3008G
6 Translation of original instruction
Safety
Version 1.1.6 - 2021-9-17