Image Access WideTEK 24F Setup Instructions page 27

All user interfaces of the Setup Wizard are described in the online help.
To exit the Setup Wizard you have to deactivate it in the LAUNCH SCAN
APPLICATION tile.
Starting the Setup Wizard after booting the scanner can be reactivated in
the DEVICE SETUP section of Scan2net.
➢ Open a tab in a web browser and enter the IP address assigned to the
scanner in the address bar.
➢ The Scan2Net window will appear.
➢ Click the SETUP DEVICE button, and then click the POWERUSER button.
➢ Enter "Poweruser" as the login name and password.
➢ Select the SETUP WIZARD button from the Administrative Settings
menu.
➢ Finally, select YES in the Setup Wizard menu.
Perform setup
27