Rebuilding The Wheel [Mtb] - DT SWISS SPLINE ROAD 2015 RC 28 Technical Manual

5.5

Rebuilding the Wheel [MTB]

Preparatory Steps
All spokes are available in the correct lengths.
Putting on the Spokes
General:
The crossing of the spokes must always be like shown
in the picture.
1. Slide all spokes through the spoke holes on the
first side of the hub.
 For easier handling, first put the spokes into
the inner side of the hub.
2. Slide all spokes through the spoke holes on the
second side of the hub.
 For easier handling, first put the spokes into
the inner side of the hub.
®
SPLINE Wheels - Technical Manual 45