DT SWISS SPLINE ROAD 2015 RC 28 Technical Manual page 48

Putting on the Nipple [SPLINE ONE Wheels]
®
Attaching of a nipple on a conventional SPLINE wheel, see
Wheels].
NOTICE
Caution!
SPLINE ONE wheels must only be build with DT Swiss Squorx nipples and special washers (PHR washers).
1. Grease the contact surface of the PHR washer and
the Squorx nipple.
2. Slide the PHR washer onto the nipple.
3. Put the spoke through the hub.
4. Screw the Squorx nipple onto the spoke.
5. Check, if the PHR washer is positioned correctly
and fits correctly within the radius of the rim
®
SPLINE Wheels - Technical Manual
Putting on the Nipple [Conventional SPLINE®
47