DT SWISS SPLINE ROAD 2015 RC 28 Technical Manual page 44

Attaching a New Spoke [SPLINE ONE]
For attaching a new spoke on a conventional SPLINE
SPLINE® Wheels].
NOTICE
Caution!
SPLINE ONE wheels must only be build with DT Swiss Squorx nipples and special washers (PHR washers).
1. Grease the contact surface of the PHR washer and
the Squorx nipple.
2. Slide the PHR washer onto the nipple.
Orientation of the washer, see figure.
3. Put the spoke through the hub.
4. Screw the Squorx nipple onto the spoke.
5. Check, if the PHR-washer is positioned correctly
and fits correctly within the radius of the rim.
®
wheel, see
®
SPLINE Wheels - Technical Manual
Attaching a New Spoke [Conventional
43