DT SWISS SPLINE ROAD 2015 RC 28 Technical Manual page 43

®
Attaching a New Spoke [Conventional SPLINE Wheels]
For attaching a new spoke on a SPLINE ONE wheel, see Attaching a New Spoke [SPLINE ONE].
1. Slide the new spoke through the spoke hole. Push
the opposite spoke beside slightly.
2. Screw on a new nipple.
Caution: The figure shows a wheel with bladed
spokes.
3. Tighten the changed and the loosened spoke.
Caution: The figure shows a wheel with bladed
spokes.
®
SPLINE Wheels - Technical Manual 42