5.4
Rebuilding the Wheel
Preparatory Steps
All spokes are available in the correct lengths.
Required Material
spokey square
nipple wrench hex
nipple wrench Torx
The spoking of the wheel must follow the common procedure of spoking a classic, 3x crossed wheel.
DT Swiss recommends the reference book «The Art of Wheelbuilding» by Gerd Schraner (ISBN 0964983532).
Closing Steps
True the wheel.
Specification
CLASSIC Wheels - Technical Manual
TTSXXXXR05633S
TTSXXXXB05632S
TTSXXXXS05630S
Link
Amount
1
(if required)
1
(if required)
1
(if required)
Link
chap. 5.3, page 46
28