DT SWISS SPLINE ROAD 2015 RC 28 Technical Manual page 33

4. Check the rotor for damages.
Grooves from the cassette are no damages. These
are normal signs of usage.
5. Remove bad notches from the rotor using a file.
6. Clean the rotor. Metal filings must be removed
completely.
Mounting the Pawls, the Spring and the Rotor Sealing
1. Mount the rotor sealing.
2. Slightly grease the rotor (fig. 4-2/7) and the rotor
sealing.
3. Mount the pawls.
Grease the pawls generously. This way, the pawls
stuck in the correct position.
®
SPLINE Wheels - Technical Manual 32