Tpms Setting - KTM 1290 SUPER ADVENTURE R 2021 Owner's Manual

7 COMBINATION INSTRUMENT

7.23.26 TPMS Setting

52
Condition
• The motorcycle is stationary.
• Model with TPMS.
–
Press the SET button or RIGHT button when the menu is closed.
–
Press the UP or DOWN button until Settings is marked. Press
the SET or the RIGHT button to open the menu.
–
Press the UP or DOWN button until TPMS Setting is marked.
–
Press the RIGHT or LEFT button to select the desired TPMS
mode.
E02093-01
Three different TPMS modes can be selected in the TPMS Setting
menu.
The Default mode corresponds to the preset basic setting of the
tire air pressure monitor recommended by KTM.
The Custom mode corresponds to the custom setting of the tire air
pressure monitor.
Info
Before TPMS mode Custom is selected, the desired air pres-
sure of the tires must be adjusted.
When TPMS mode Customis selected, the next received
value of the TPMS sensors is saved as a new reference
value.
It may take some time for the TPMS sensors to send a value
and for the new reference value to be saved.
The reference value can be between 1 bar and 5 bar
(between 14.5 psi and 72.5 psi).
The stored reference value is displayed in the
Bike Info menu.
If the value currently measured by the tire air pressure sen-
sors is more than 50 % above or 20 % below the stored
reference value, a warning appears on the combination
instrument display.
In Warnings Off mode, the warnings from the tire air pressure mon-
itor are deactivated. The tire air pressure is still measured by the
tire air pressure sensors, but warnings no longer appear on the
combination instrument display.
Info
KTM recommends Default mode.
A second wheel set can be programmed via the KTM diag-
nostics tool. Your authorized KTM workshop will be glad to
help.