15.1
Removing the front wheel
Preparatory work
–
Raise the vehicle with the center stand. (
Main work
–
Place a load on the rear of the vehicle.
The front wheel is not in contact with the ground.
–
Remove screw
hole.
E02365-10
–
Remove screws
–
Press back the brake linings by slightly tilting the brake
calipers laterally on the brake disc.
–
Pull the brake calipers carefully back from the brake discs and
hang to the side loosely.
Info
Do not operate the hand brake lever if the brake
calipers have been removed.
E02366-10
–
Loosen screw
–
Loosen screws
–
Press on screw
clamp.
–
Remove screw
Warning
Danger of accidents Damaged brake discs reduce the
E02382-10
braking effect.
–
Always lay the wheel down in such a way that the
brake discs are not damaged.
–
Hold the front wheel and remove the wheel spindle. Take the
front wheel out of the fork.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
–
Remove spacers
H02027-10
1
and pull wheel speed sensor
3
from both brake calipers.
4
by several rotations.
5
.
4
to push the wheel spindle out of the axle
4
.
6
.
WHEELS, TIRES 15
p. 89)
2
out of the
121