15.3
Removing the rear wheel
–
Position brake calipers.
The brake linings are correctly positioned.
–
Mount screws
yet.
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point. Secure the hand brake lever in the activated position.
The brake calipers straighten.
–
E02366-11
Tighten screws
Guideline
Screw, front
brake caliper
–
Remove locking piece of the hand brake lever.
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Remove the vehicle from the center stand. (
E02365-11
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
Tighten screws
Guideline
Screw, fork shoe
E02384-10
Preparatory work
–
Raise the vehicle with the center stand. (
Main work
–
Manually press the brake caliper toward the brake disc to push
back the brake pistons.
E02386-10
5
on both brake calipers, but do not tighten
5
on both brake calipers.
M10x1.5x55
45 Nm (33.2 lbf ft)
6
in the hole.
7
.
M6
10 Nm (7.4 lbf ft)
8
.
M8x20
15 Nm (11.1 lbf ft)
WHEELS, TIRES 15
Loctite
®
243™
p. 89)
p. 89)
123