Advertisement
Quick Links
Advertisement
Related Manuals for KTM 1290 Super Duke GT EU 2017
Summary of Contents for KTM 1290 Super Duke GT EU 2017
- Page 1 SETUP INSTRUCTIONS 2017 1290 Super Duke GT Art. no. 3213610en...
- Page 3 KTM accepts no liability for delivery options, devi- ations from illustrations and descriptions, misprints, and other errors.
- Page 4 MEANS OF REPRESENTATION Symbols used The meaning of specific symbols is described below. Indicates an expected reaction (e.g. of a work step or a function). Indicates an unexpected reaction (e.g. of a work step or a function). Indicates a page reference (more information is provided on the specified page). Indicates information with more details or tips.
- Page 5 SETUP Unpacking and setting up the vehicle Preparatory work – Remove the box. Main work – Remove the adhesive tape in the upper area of the motorcycle. S01182-01 – Roll down the film at the sides. Info To avoid damaging the motorcycle during unpacking, leave the other films on the vehicle until you have finished work on the vehicle.
- Page 6 SETUP – First bolt the handlebar support with screws onto the longer, higher side of the handlebar supports so that both parts touch. – Tighten screws evenly. Guideline Screw, handlebar clamp 20 Nm (14.8 lbf ft) – Tighten screws of the controls. Guideline Remaining screws, chassis 10 Nm (7.4 lbf ft)
- Page 7 SETUP (Super Duke GT US) – Bond the reflectors on the right and left side of the reflector holder. – Mount the reflector holder on license plate holder Guideline Remaining screws, chassis 10 Nm (7.4 lbf ft) E00282-10 – Remove the passenger seat. ( p.
- Page 8 SETUP – Prepare the vehicle according to the specifications in the KTM Dealer.net for han- dover to the customer.
- Page 9 WORK Removing the passenger seat – Insert the ignition key in seat lock and turn it clockwise. – Raise front of the passenger seat, pull toward the tank, and remove upward. – Remove the ignition key. S01106-10 Mounting the passenger seat –...
- Page 10 WORK Recharging the battery Warning Risk of injury Battery acid and battery gases cause serious chemical burns. – Keep batteries out of the reach of children. – Wear suitable protective clothing and safety glasses. – Avoid contact with battery acid and battery gases. –...
- Page 11 WORK Finishing work – Connect the negative cable of the battery. ( p. 10) – Mount the front rider's seat. ( p. 7) – Mount the passenger seat. ( p. 7) – Set the time and date. Disconnecting the negative cable of the battery Warning Risk of injury Battery acid and battery gases cause serious chemical burns.
- Page 12 WORK Connecting the negative cable of the battery Warning Risk of injury Battery acid and battery gases cause serious chemical burns. – Keep batteries out of the reach of children. – Wear suitable protective clothing and safety glasses. – Avoid contact with battery acid and battery gases. –...
- Page 13 WORK Warning Danger of poisoning Fuel is poisonous and a health hazard. – Avoid skin, eye and clothing contact with fuel. – Immediately consult a doctor if you swallow fuel. – Do not inhale fuel vapors. – In case of skin contact, rinse the affected area with plenty of water. –...
- Page 14 WORK – Lift cover of the filler cap and insert ignition key in the fuel tank lock. H01281-10 Note Danger of damage The ignition key may break if overloaded. Damaged ignition keys must be replaced. – Push down on the filler cap to take pressure off the ignition key. –...
- Page 15 TECHNICAL DATA Chassis tightening torques – EJOT PT ® Remaining screws, chassis K50x12 1 Nm (0.7 lbf ft) – Remaining screws, chassis EJOT PT ® K50x14 1 Nm (0.7 lbf ft) – Remaining screws, chassis EJOT PT ® K50x16 2 Nm (1.5 lbf ft) –...
- Page 16 TECHNICAL DATA Loctite ® 243™ Screw, steering damper, holder, on 8 Nm (5.9 lbf ft) frame Screw, step plate for foot brake lever 10 Nm (7.4 lbf ft) Loctite ® 243™ – Screw, suitcase molds 6 Nm (4.4 lbf ft) –...
- Page 17 TECHNICAL DATA – Screw, eccentric 70 Nm (51.6 lbf ft) Nut, swingarm pivot M19x1.5 130 Nm (95.9 lbf ft) Thread greased – Nut, seat lock M22x1.5 6 Nm (4.4 lbf ft) Bolt, front axle M25x1.5 45 Nm (33.2 lbf ft) Thread greased –...
- Page 18 SUBSTANCES Super unleaded (ROZ 95/RON 95/PON 91) Standard/classification – DIN EN 228 (ROZ 95/RON 95/PON 91) Guideline – Only use unleaded super fuel that matches or is equivalent to the specified fuel grade. – Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use. Info Do not use fuel containing methanol (e.
- Page 19 *3213610en* 3213610en 11/2016 KTM Sportmotorcycle GmbH 5230 Mattighofen/Austria Photo: Mitterbauer/KTM http://www.ktm.com...
Need help?
Do you have a question about the 1290 Super Duke GT EU 2017 and is the answer not in the manual?
Questions and answers