Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for KTM 1290 Super Duke GT Series
Summary of Contents for KTM 1290 Super Duke GT Series
- Page 1 SETUP INSTRUCTIONS 2016 1290 Super Duke GT Art. no. 3213506en...
- Page 3 KTM accepts no liability for delivery options, devi- ations from illustrations and descriptions, misprints, and other errors.
- Page 4 MEANS OF REPRESENTATION Symbols used The meaning of specific symbols is described below. Indicates an expected reaction (e.g. of a work step or a function). Indicates an unexpected reaction (e.g. of a work step or a function). Indicates a page reference (more information is provided on the specified page). Indicates information with more details or tips.
- Page 5 SETUP Unpacking and setting up the vehicle Preparatory work – Remove the box. Main work – Remove the adhesive tape in the upper area of the motorcycle. S01182-01 – Roll down the film at the sides. Info To avoid damaging the motorcycle during unpacking, leave the other films on the vehicle until you have finished work on the vehicle.
- Page 6 SETUP – Tighten screws evenly. Guideline Screw, handlebar clamp 20 Nm (14.8 lbf ft) – Tighten screws of the controls. Guideline Remaining screws, chassis 10 Nm (7.4 lbf ft) Screw, combination switch, right 3.5 Nm (2.58 lbf ft) –...
- Page 7 SETUP (1290 Super Duke GT US) – Bond the reflectors on the right and left side of the reflector holder. – Mount the reflector holder on license plate holder Guideline Remaining screws, chassis 10 Nm (7.4 lbf ft) E00282-10 –...
- Page 8 SETUP – Prepare the vehicle according to the specifications in the KTM Dealer.net for han- dover to the customer.
- Page 9 WORK Removing the passenger seat – Insert the ignition key in seat lock and turn it clockwise. – Raise front of the passenger seat, pull toward the tank, and remove upward. – Remove the ignition key. S01106-10 Mounting the passenger seat –...
- Page 10 – Do not dispose of batteries with the household waste. Dispose of a defective battery in an environmentally friendly manner. Give the battery to your authorized KTM dealer or dispose of it at a collection point for used batteries. Warning Environmental hazard Hazardous substances cause environmental damage.
- Page 11 WORK Disconnecting the negative cable of the battery Warning Risk of injury Battery acid and battery gases cause serious chemical burns. – Keep batteries out of the reach of children. – Wear suitable protective clothing and goggles. – Avoid contact with battery acid and battery gases. –...
- Page 12 WORK Main work – Position negative cable ; mount and tighten the screw. Guideline Screw, battery terminal 4.5 Nm (3.32 lbf ft) D01427-11 – Fold down cover – Mount and tighten screw Guideline Remaining screws, chassis 5 Nm (3.7 lbf ft) D01428-10 Finishing work –...
- Page 13 WORK Opening the filler cap Danger Fire hazard Fuel is highly flammable. – Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately. –...
- Page 14 WORK – Remove ignition key and close cover 3.11 "Clock/Date" Condition • The vehicle is stationary. – Press the UP or DOWN button until the "Settings" menu appears on the matrix dis- play. Pressing the SET button opens the menu. –...
- Page 15 TECHNICAL DATA Chassis tightening torques – EJOT PT ® Remaining screws, chassis K50x12 1 Nm (0.7 lbf ft) – Remaining screws, chassis EJOT PT ® K50x14 1 Nm (0.7 lbf ft) – Remaining screws, chassis EJOT PT ® K50x16 2 Nm (1.5 lbf ft) –...
- Page 16 TECHNICAL DATA – Screw, wheel speed sensor, rear 4 Nm (3 lbf ft) – Nut, manifold on cylinder head Tightening sequence: Tighten the nuts evenly. Do not warp the metal plate. 25 Nm (18.4 lbf ft) – Nut, rear sprocket 36 Nm (26.6 lbf ft) –...
- Page 17 TECHNICAL DATA Loctite ® 262™/lock the lock- Nut, rear axle, shock absorber side M35x1.5 200 Nm (147.5 lbf ft) ing wire with locking varnish Nut, rear axle M50x1.5 250 Nm (184.4 lbf ft) Thread greased/lock locking wire with locking varnish...
- Page 18 SUBSTANCES Super unleaded (ROZ 95/RON 95/PON 91) Standard/classification – DIN EN 228 (ROZ 95/RON 95/PON 91) Guideline – Only use unleaded super fuel that matches or is equivalent to the specified fuel grade. – Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use. Info Do not use fuel containing methanol (e.
- Page 19 *3213506en* 3213506en 03/2016 KTM Sportmotorcycle GmbH 5230 Mattighofen/Austria Photo: Mitterbauer/KTM http://www.ktm.com...
Need help?
Do you have a question about the 1290 Super Duke GT Series and is the answer not in the manual?
Questions and answers