Remote Operation - ADJ POCKET PRO User Manual

Pocket Pro / Pocket Pro Pearl

Remote Operation

The UC IR (sold separately) infrared remote gives you control of various functions. To control the
fixture you must aim the remote at the front of the fixture and be no more than 30 feet away.
The Airstream IR Transmitter (sold separately) remote transmitter plugs into the headphone jack
of your iOS phone or tablet. To control your IR fixture you must raise the volume to the maximum on
your iOS phone or tablet and aim the transmitter at the fixture sensor and be no more than 15 feet
away. After you have purchased the Airstream IR transmitters, the app is a free download from the
app store for your iOS phone or tablet. The app comes with 3 pages of control depending on the
fixture you are using. Please see below for IR functions including the corresponding app page.
Works with App page 1.
STAND BY - Pressing this button will blackout the fixture.
FULL ON - This button is invalid for this fixture.
FADE/GOBO - Press this button to enter Gobo mode. Use the 1-8 buttons to select your desired
gobo. See gobos on the next page, then number buttons correspond to the gobo.
"DIMMER +" and "DIMMER -" - Use these buttons to adjust the output intensity and to adjust the
strobe speed.
STROBE - Press and hold this button to activate strobe mode. Release the button and press and
hold this button again to activate random strobe.
COLOR - Press this button to enter Dimmer mode. Use the 1-8 buttons to select your desired color.
See the DMX colors on the next page. Adjust the output intensity using the "DIMMER +" and
"DIMMER -" buttons.
1-8 - When in either Gobo mode or Color mode, these buttons will allow you to select either a gobo
or color.
SOUND ON & OFF - These buttons activate and deactivate the sound active mode.
SHOW 0 - Press this button to activate show mode. Use buttons 1-9 to find your desired show.
ADJ Products, LLC - www.adj.com - Pocket Pro / Pocket Pro Pearl User Manual Page 18