T8FB Basic Setup
1.1 Receivers
The standard receiver packed with T8FB is R8EF, 8-channel receiver with PWM and SBUS/PPM signal output
supported.
Signal Working Mode
(1) PWM Working Mode: Receiver indicator is RED with all 8 channels output PWM signal.
(2) SBUS/PPM Working Mode
Receiver indicator is Blue(Purple) with 8 channels output in total. Channel 1 is SBUS signal, channel 2 PPM
signal and channel 3 to 8 PWM signal.
Signal Switch between SBUS&PPM and PWM
Short press the binding button on the receiver twice within 1 second to switch the SBUS/PPM signal to PWM
signal.
1.2 Binding
Every transmitter owns a unique ID code. Before using, binding transmitter to receiver on aircraft is a must.
When done binding, ID code will be stored in the receiver, no need to rebind, unless the receiver is going to
work with another transmitter. If a new compatible receiver is purchased, binding needs to be done before
2
Radiolink Electronic Ltd
www.radiolink.com