System Menu - RadioLink T8FB User Manual

8-channel remote controller app parameter setting via bluetooth connection compatible with fixed-wings/gliders/multirotors/cars/boats/robots
Hide thumbs Also See for T8FB:
Table of Contents

Advertisement

accidentally turned off.
Note
V-TAIL function and ELEVON/AILEVATOR mix functions can't be activated at the same time.
Make sure to move the elevator and rudder sticks regularly while checking the servo motions. If a large travel
value is set, when the sticks are moved at the same time, the controls may mutually disturb or run out of travel.
Decrease the travel until no disturbance occurs.

3.3.4 SYSTEM Menu

There are totally two system menus in Android APP with the quantity of programmable mixing controls is
increased to four.
AUX-CH
CH5/6/7/8 can be personalized to different switches. If any of the auxiliary channels is not for use, NULL should
be set.
TX-ALARM
The default low voltage value is automatically set according to the battery used(2S-7.3V/3S-11.0V) and also
can be personalized as well. When the transmitter voltage is lower than the value set, T8FB will make D sound
to warn.
STK-MODE(SYSTEM)
It's always the default mode of the T8FB with data READ by the APP.
Mode 1: left joystick-Rudder and Elevator; right joystick-Aileron and Throttle
Mode 2: left joystick-Rudder and Throttle, right joystick-Aileron and Elevator
Mode 3: left joystick-Aileron and Elevator, right joystick-Rudder and Throttle
Mode 4: left joystick- Aileron and Throttle, right joystick-Rudder and Elevator
VERSION (Under STK-MODE,SYSTEM)
The numbers mean current firmware versions which can be upgraded. The detailed steps of firmware upgrade
please refer to Chapter 2.
Note The other version on the right (above SYSTEM2) is the APP version.
EXT-ALARM(SYSTEM2)
To return the model voltage, RadioLink receivers of telemetry functions R7FG or R8F should be used. The low
voltage alarm value can be personalized. When the model voltage goes lower than the set value, T8FB will
make D sound to warn.
* This function is currently available on Android APP V7.1 and above.
RSSI-ALARM(SYSTEM2)
The RSSI alarm value can be personalized. When the RSSI goes lower than the set value, T8FB will make D
sound to warn.
10
Radiolink Electronic Ltd
www.radiolink.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T8fb-bt

Table of Contents