KEB COMBIVERT H6 Series Instructions For Use Manual page 53

CERTIFICATION
Inverter
•
•
•
•
Inverter
•
Copper conductors
19H6
20H6 60°C or 75°C
21H6
24H6
25H6
75°C
27H6
28H6
These supply modules are only for use with drive modules that are part of the
COMBIVERT H6 series.
Brake Resistors provided in the end-use shall be controlled by manufacturer and
type designation, and separately subjected to above specified tests, due to differ-
ences in brake resistors construction, even with identical rating.
Connection of an External Temperature Sensor was not evaluated.
Maximum heatsink temperature for H6 models shall be maintained at the following
listed values via a liquid cooled system:
Maximum heatsink
temperature
19H6
80°C
20H6
21H6 60°C
24H6 80°C
25H6 60°C
27H6 80°C
28H6 60°C
Suitable for use on a Circuit Capable of delivering not more 18k rms Symmetrical
Amperes, 480 Volts maximum when protected by fuses as specified in the follow-
ing table:
53