Operating The System Using A Computer (J-Link); Remote Operating - jablotron 100+ User Manual

2. OPERATING THE JABLOTRON 100 + SYSTEM
18
One-way keyfobs
One-way keyfobs send a signal every time a button is pressed without
receiving feedback from the control panel. Sending a signal is confirmed
only by a short flash of the red LED and alternatively with a beep.
The button functions are differentiated by lock icons. The closed lock icon
sets programmed sections; the opened lock icon unsets them. The buttons
with symbols of full and empty circles can control another section or one
status PG output (e.g. to turn the lights on and off) or two PG outputs
(e.g. a garage door and door lock).
A low battery is indicated by a red LED and acoustically (3 fast beeps).
2.2.3 OPERATING THE SYSTEM USING A COMPUTER
(J-LINK)
The JABLOTRON 100 + can be operated locally using a computer
connected via USB and installed J-Link software, which can be used for user
management (change user's codes, card/tags, phone numbers etc.) and set
calendar events.
The J-link software is available for local connection with a control panel.
It is located on the system's security drive (FLEXI_CFG/j-link), which will
appear after the control panel is connected to a PC via USB.
It is possible to set / unset the system using icons on the lower bar
of the program or with the "Status" buttons in the "Section" tab. If a keypad
with at least one controllable segment is used with the system, then it is possible
to set/unset the system in the J-Link software using an on-screen virtual keypad
(click on "Keypad" in the main menu).
WARNING: When the system is controlled via PC, it doesn't check for triggered devices while setting.
This may lead to setting with a triggered device. Be careful when you control the system this way!

2.3 REMOTE OPERATING

The highest comfort for remote operating and management of the system is provided by the MyJABLOTRON
service.
The MyJABLOTRON web interface is a unique service which allows on-line access to JABLOTRON
devices. It allows end-users to monitor and control the system. It is available in a form of a smartphone app
and as a web application.
The MyJABLOTRON service allows users to:
View the current system status,
a
Set/unset the entire system or a part of it,
a
Control programmable outputs,
a
View the event history,
a
Send reports to selected users via SMS, e-mail or PUSH notifications,
a
Capture images from photo verification devices and browse through them in the Photo gallery tab
a
or directly in Recent events,
Monitor current temperature or energy consumption, including a history overview on graphic charts,
a
And other useful features.
a
Depending on your country or region, a web account in MyJABLOTRON can be set up by an authorized
JABLOTRON partner. The login name is the user e-mail address. The password for the first log in will be sent
to this address. The password can be changed anytime in the user settings.