3. START USING YOUR COOKER HOOD
LED touch control
LED touch control has four buttons, see above picture:
1. Power-on:
• After connecting the cooker hood to the main supply, the backlight of all buttons
will turn on and the buzzer sounds for once. The LED display is closed.The cooker
hood doesn't work and enters into stand-by mode.
2. (Lamp) button
• Press (Lamp) button, the backlight of this button and the light will be on. Press
again, the backlight of lamp button and the lights will be off. The above steps can
be repeated operating. The lamp works separately and is not controlled by the
power button.
3. (Power) button
• Press (Power) button, the cooker hood starts to work at the low speed and the
LED display will display "1". Press again, the cooker hood will stop. The cooker
hood speeds can only be adjusted when switching the power button.
• After switching off cooker hood by power button, when press the power button
again to start-up the hood, motor will work at the speed before the last exit.
4. (Speed) button:
• The cooker hood has three speed levels ,they are low,mid,high, and the corresponding
LED display will be"1","2","3".
• After switching on the power button, the hood starts to work at low speed and the
LED display will display "1".
• Press
(Speed) button again when it works at low speed, the cooker hood works
at the mid speed and the LED display will display "2".
• Press
(Speed) button again when it works at mid speed, the cooker hood at the
high speed and the LED display will display "3".
• 4.4 During the working, you can touch
circularly: "low→mid→high→low→mid......".
(Speed) button to change the speed
EN
29