System Components; Documentation; Standard Documentation; Supplementary Device-Dependent Documentation - Endress+Hauser Proline Promass I 100 Technical Information

Proline Promass I 100

System components

Standard documentation

Supplementary device-
dependent documentation
Endress+Hauser
Accessories Description
Memograph M graphic The Memograph M graphic display recorder provides information on all relevant
display recorder measured variables. Measured values are recorded correctly, limit values are
monitored and measuring points analyzed. The data are stored in the 256 MB
internal memory and also on a SD card or USB stick.
iTEMP The temperature transmitters can be used in all applications and are suitable for
the measurement of gases, steam and liquids. They can be used to read in the fluid
temperature.

Documentation

For an overview of the scope of the associated Technical Documentation, refer to the following:
• The CD-ROM provided for the device (depending on the device version, the CD-ROM might
not be part of the delivery!)
• The W@M Device Viewer : Enter the serial number from the nameplate
(www.endress.com/deviceviewer)
• The Endress+Hauser Operations App: Enter the serial number from the nameplate or scan the
2-D matrix code (QR code) on the nameplate.
Brief Operating Instructions
Measuring device
Promass I 100
Operating Instructions
Measuring device HART
Promass I 100 BA01190D
Safety Instructions
Contents
ATEX/IECEx Ex i
ATEX/IECEx Ex nA
cCSAus IS
INMETRO Ex i
INMETRO Ex nA
NEPSI Ex i
NEPSI Ex nA
Special Documentation
Contents
Information on the Pressure Equipment Directive
Modbus RS485 Register Information
For details, see "Technical Information" TI00133R and Operating Instructions
BA00247R
For details, see "Fields of Activity", FA00006T
Documentation code
Documentation code
PROFIBUS DP
BA01251D
KA01117D
Modbus RS485 EtherNet/IP
BA01058D BA01066D
Documentation code
XA00159D
XA01029D
XA00160D
XA01219D
XA01220D
XA01249D
XA01262D
Documentation code
SD00142D
SD00154D
83