Device Architecture; Safety; Input; Measured Variable - Endress+Hauser Proline Promass I 100 Technical Information

Proline Promass I 100

Device architecture

Safety

Measured variable

Endress+Hauser
8
9
10
5
1 Possibilities for integrating measuring devices into a system
1 Control system (e.g. PLC)
2 EtherNet/IP
3 PROFIBUS DP
4 Modbus RS485
5 4-20 mA HART, pulse/frequency/switch output
6 Safety Barrier Promass 100
7 Modbus RS485 intrinsically safe
8 Non-hazardous area
9 Non-hazardous area and Zone 2/Div. 2
10 Intrinsically safe area and Zone 1/Div. 1
IT security
We only provide a warranty if the device is installed and used as described in the Operating
Instructions. The device is equipped with security mechanisms to protect it against any inadvertent
changes to the device settings.
IT security measures in line with operators' security standards and designed to provide additional
protection for the device and device data transfer must be implemented by the operators themselves.

Input

Direct measured variables
• Mass flow
• Density
• Temperature
• Viscosity
Calculated measured variables
• Volume flow
• Corrected volume flow
• Reference density
1 2 3 4
6 7
A0016779
7