Table of Contents
Advertisement
ACT Fresnel 50 WW
4. Display Settings
In this menu you can adjust the display settings of the device.
01) Press the UP/DOWN buttons to scroll through the following options:
02) Press the ENTER button to confirm the selection and open the pop-up submenu where you can
adjust the settings.
03) Press the UP/DOWN buttons to select the desired setting.
04) Press the ENTER button to confirm the selection.
The available options are:
●
Display Inverse:
●
Backlight Auto Off: The backlight of the OLED display will not turn off automatically after 30
●
Display Contrast:
5. Fixture Test
In this menu you can perform test of the device's parameters and adjust manually the dimmer and
strobe values.
01) Press the UP/DOWN buttons to select one of the following 2 options:
●
Auto Test:
●
Manually Defined:
02) Press the ENTER button to confirm your choice.
5.1 Manually Defined
In this submenu you can manually adjust the dimmer and strobe values.
01) Press the UP/DOWN buttons to toggle between Dimmer and Strobe:
02) Press the ENTER button to confirm your selection and open the respective pop-up submenu where
you can adjust the values.
03) Press the UP/DOWN buttons to adjust the values. The adjustment range is between 0 and 255.
04) Press the ENTER button to confirm your choice.
Order code: 34011
The OLED display will be rotated at 180° (NO/YES)
seconds of inactivity (NO/YES)
The adjustment range is between 0 and 30 (from low to high contrast)
The device performs an auto test of its parameters.
See 5.1 Manually Defined for more information
19
Advertisement
Table of Contents
