Related Manuals for SHOWTEC IW-720
Summary of Contents for SHOWTEC IW-720
- Page 1 MANUAL ENGLISH Infinity iW-720 Ordercode: 41521 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Infinity iW-720 Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Connection with the mains............................6 Return Procedure ................................6 Claims ....................................6 Description of the device ..............................7 Overview ..................................8 Backside .................................. -
Page 3: Warning
Your shipment includes: • Showtec Infinity iW-720 LED Wash with Powercon powercable 0,9m • 1 bracket for truss mounting (spare part number SPCI159) •... - Page 4 If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 5: Operating Determinations
Infinity iW-720 Operating Determinations ● This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. ● The minimum distance between light-output and the illuminated surface must be more than 1 meter. - Page 6 Infinity iW-720 Mounting a clamp to the underside of the Infinity moving head Improper installation can cause serious damage to people and property ! Ordercode: 41521...
-
Page 7: Connection With The Mains
Infinity iW-720 Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER FASE BLUE... -
Page 8: Description Of The Device
Infinity iW-720 Description of the device Features The Showtec Infinity iW-720 LED Wash is a moving-head with high output and great effects. ● Beam & Wash effect ● High torque motors ● Ultra-fast movements ● 1 Clamp rigging ● Dimmer curves: Linear, Square, I-Square, S curve ●... -
Page 9: Overview
Infinity iW-720 Overview Beam angle 7° - 50° Electronic adjustment Fig. 01 01) Lens 02) Menu Buttons + LCD Display Backside 03) DMX signal connector (IN) 3-pin 04) DMX signal connector (OUT) 3-pin 05) Earth connection 06) Fuse F4AL 250V... -
Page 10: Installation
Infinity iW-720 Installation Remove all packing materials from the Infinity iW-720 LED Wash. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. -
Page 11: Multiple Infinity's (Dmx Control)
Infinity iW-720 Multiple Infinity’s (DMX Control) 01) Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). 03) Plug the end of the electric mains power cord into a proper electric power supply socket. -
Page 12: Fixture Linking
DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by Neutrik®. Ordercode FL71150 (1,5m.), FL713 (3m.), FL716 (6m.), FL7110 (10m.). The Infinity iW-720 LED Wash can be operated with a controller in control mode or without the controller in stand-alone mode. -
Page 13: Control Panel
Infinity iW-720 Control Panel Home button Edit Menu button Settings Mode Button Address Setting Button Infinity Logo Button Up Button Down Button OK/ENTER Left Button Right Button LCD Display Fig. 05 Control Mode The fixtures are individually addressed on a data-link and connected to the controller. -
Page 14: Menu Overview
Infinity iW-720 Menu Overview Ordercode: 41521... -
Page 15: Main Menu Options
Infinity iW-720 Main Menu Options DMX address Edit Mode Settings Menu Built-in Programs Test Mode Info Home Edit Menu Down Setting Mode Address Setting Left Infinity Logo Right 1. DMX Addressing With this menu you can set the DMX address. -
Page 16: Edit Mode
Infinity iW-720 2. Edit Mode With this menu you can set your desired mode. 01) Press the button and select 02) Press the button, to confirm. You can choose 3 different modes. Use the Up / Down buttons to select the required mode:... -
Page 17: Built-In Programs
Infinity iW-720 03) Once you have selected the desired mode, press the buttons to change the value from No to YES. 04) A couple of menus have more options, then your regular, yes or no function: Pan Angle: 540°, 360°, 180°... -
Page 18: Test Menu
Infinity iW-720 5. Test Menu With this menu you can set your desired mode. 01) Press the button and select 02) Press the button, to confirm. You can choose 2 different modes. Use the Up / Down buttons to select the required mode:... -
Page 19: Dmx Channels
Infinity iW-720 DMX Channels 29 Channels (Advanced) Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head adjustment from one end of the slider to the other (0-255, 128-center). The head can be turned by 540° and stopped at any position you wish. - Page 20 Infinity iW-720 Channel 14 – Red 3 Dimmer intensity (CH25 and CH26 must be open 0-255 Red from 0 – 100% Channel 15 – Green 3 Dimmer intensity (CH25 and CH26 must be open 0-255 Green from 0 – 100% Channel 16 –...
- Page 21 Infinity iW-720 Channel 22 – Built-in Colors (CH25 and CH26 must be open No Function Color 1 10-14 Color 2 15-19 Color 3 20-24 Color 4 25-29 Color 5 30-34 Color 6 35-39 Color 7 40-44 Color 8 45-49 Color 9...
- Page 22 Infinity iW-720 Channel 23 – Built-in LED (CH25 and CH26 must be open Use in combination with CH24 0-15 No Function 16-31 Built-in 1 32-47 Built-in 2 48-63 Built-in 3 64-79 Built-in 4 80-95 Built-in 5 96-111 Built-in 6 112-127...
- Page 23 Infinity iW-720 Channel 27 – Zoom 0-255 From big to small Channel 28 – Channel Functions No Function 10-14 Blackout during Pan/Tilt movement 15-19 Reserved 20-24 Reserved 25-29 Reserved 30-34 Reserved 35-39 Reserved 40-44 Reserved 45-49 Reserved 50-54 Reset Pan after 3 seconds...
-
Page 24: Channels (Basic)
Infinity iW-720 14 Channels (Basic) Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head adjustment from one end of the slider to the other (0-255, 128-center). The head can be turned by 540° and stopped at any position you wish. - Page 25 Infinity iW-720 Channel 10 – Dimmer (Shutter and Colors RGBW must be open 0-255 From black to brightest Channel 11 – Shutter / Strobe (Dimmer must be open 0-19 Close 20-24 Shutter open 25-64 Strobe effect 1, from fast to slow...
-
Page 26: Channel Settings
Infinity iW-720 130-134 Fan Temperature controlled 135-139 Dimming Fast 140-144 Dimming Smooth 145-239 No Function 240-247 XY Smoothing model open 248-255 XY Smoothing model to shut down Channel 14 – Built-in Programs; Use in combination with CH 4 - CH 7... -
Page 27: Maintenance
Infinity iW-720 Maintenance The Showtec Infinity iW-720 LED Wash requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply and then wipe the cover with a damp cloth. Wipe the front glass panel clean with glass cleaner and a soft cloth. -
Page 28: Battery Replacement
Infinity iW-720 Battery Replacement (must be carried out by a qualified technician!) 01) Unplug the unit from the electric power source. 02) Remove the 6 screws on the front side of the Infinity. 03) Gently pull the front cover from the device. -
Page 29: Troubleshooting
01) First try to reset the device to its original factory default settings (3-Settings Menu see page 15). 02) Power supply. Check that the unit is plugged into an appropriate power supply. 03) The LEDs. Return the Infinity to your Showtec dealer. 04) The fuse. Replace the fuse. See page 26 for replacing the fuse. - Page 30 Infinity iW-720 Problem Probable cause(s) Remedy One or more No power to the fixture. ● Check that power is switched on and fixtures are cables are plugged in. completely dead. Primary fuse blown. ● Replace fuse. Fixtures reset The controller is not connected.
-
Page 31: Product Specification
Infinity iW-720 Product Specification Model: Showtec Infinity iW-720 LED Wash Input Voltage: 100-240 VAC Continuous Power: 240W max. at full output Fuse: F5AL / 250V Dimensions: 204 x 290 x 388 mm (LxWxH) Weight: 8 kg Operation and Programming Signal pin OUT:... - Page 32 ©2014 Showtec...