Barndoor Installation; Color Frame Installation - SHOWTEC ACT Fresnel 50 WW Manual

ACT Fresnel 50 WW

Barndoor Installation

The ACT Fresnel 50 WW is delivered with a barndoor. To install the barndoor, follow the steps below:
01) Push the spring-loaded screw (01) and at the same time lift the color frame clip (02) and flip it
backwards (see Fig. 07).
02) Insert the barndoor into the color frame holders (04) (see Fig. 08).
03) Pull the color frame clip (02) downwards to release the spring-loaded screw (01) (see Fig. 09). The
barndoor will be locked in position.
04) Secure the barndoor to the trussing with an appropriate secondary attachment, for example a
safety cable. See Rigging on page 5.
Make sure that the barndoor is locked in position with the color frame clip before using

Color Frame Installation

The ACT Fresnel 50 WW is delivered with a color frame. You can insert a color gel or a diffusion filter into
the color frame. To install the color frame, follow the steps below:
01) Push the spring-loaded screw (01) and at the same time lift the color frame clip (02) and flip it
backwards (see Fig. 10).
02) Insert a color gel or a diffusion filter into the color frame.
03) Insert the color frame into the color frame holders (04) (see Fig. 11).
04) Pull the color frame clip (02) downwards to release the spring-loaded screw (01) (see Fig. 12). The
color frame will be locked in position.
05) Secure the color frame to the trussing with an appropriate secondary attachment, for example a
safety cable. See Rigging on page 5.
Make sure that the color frame is locked in position with the color frame clip before using
Order code: 34011
Fig. 07
the ACT Fresnel 50 WW.
Fig. 10
the ACT Fresnel 50 WW.
Fig. 08
Fig. 11
10
Fig. 09
Fig. 12