Table of Contents
Advertisement
Channels Advanced/Basic Mode
1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Channels menu.
3) Press enter to open this menu. You can choose Basic (13CH) or Advanced (17CH) mode.
Use the Up / Down buttons to select one.
4) Once you have set the desired mode, press the enter button to store your setting.
Display Mode
1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Display menu.
3) Press enter to open this menu. You can choose 60_close or Bright mode.
Use the Up / Down buttons to select one.
4) Once you have set the desired mode, press the enter button to store your setting.
Keylock Mode
1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Keylock menu.
3) Press enter to open this menu. Use the Up / Down buttons to select Yes or No.
4) Once you have set Yes, press the enter button to lock the device.
5) It will now take 30 seconds before the device locks itself. When you turn the device off and then on,
It‟s also locked.
NOTE: In the event that the device is locked, please use the factory password below.
Factory Password: UP + DOWN + UP + DOWN
Then press ENTER to unlock the device.
Dimmer Mode
1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Dimmer menu to select dimmer mode and
dimmer speed.
3) When DIMMER is set to OFF, then RGBW and MASTER DIMMER are linear.
Dim 1, 2, 3, 4 are speed modes of the non linear dimmer, Dim1 is fastest, Dim4 is slowest.
The factory default setting is Dim4.
Info version
1) Press Menu, until the display shows: Intro
2) Press Enter and use the Up/Down buttons to go to the Info menu.
3) Press enter to see your Indigo version number.
16
Advertisement
Table of Contents
