Master (Auto)/Slave Mode; Sound-Controlled Mode; Led Display Continuous/Off; Led Display Reverse Mode - SHOWTEC Kanjo Spot 10 V1 Manual

Kanjo Spot 10

4. Master (Auto)/Slave Mode

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the ENTER button to enter the menu.
03) Press the UP and DOWN buttons to choose one of the two modes:
04) When the display shows
The display will show
05) Press the MENU button to enter the Master/Auto Mode.
06) The device is now operating in the Master/Auto Mode and will display its built-in auto show.
07) When the display shows
08) The device is now operating in the Slave Mode and will react the same as its master device.

5. Sound-controlled Mode

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the ENTER button to enter the menu.
03) Press the UP and DOWN buttons to activate/deactivate the Sound-controlled Mode.
Choose between
04) Press the ENTER button to confirm your choice.

6. LED Display Continuous/OFF

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the ENTER button to enter the menu.
03) Press the UP and DOWN buttons to choose between the two options:
04) Press the ENTER button to confirm your choice.

7. LED Display Reverse Mode

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the ENTER button to enter the menu.
03) Press the UP and DOWN buttons to choose between the two options:
04) Press the ENTER button to confirm your choice.

8. Reset

01) While in the main menu, press the UP and DOWN buttons until the display shows
02) Press the ENTER button to enter the menu.
03) Press the UP and DOWN buttons to activate/cancel reset. Choose between
04) If the display shows
05) If the display shows
Ordercode: 45010
Master/Auto mode
Slave mode
, press the ENTER button to activate Master/Auto mode.
.
, press the ENTER button to activate the Slave Mode.
.
Continuous LED Display
LED Display OFF after 110 seconds
Normal view
Vertical flip view
, press the ENTER button. The device will reset the settings.
, press the ENTER button. The device will return to the main menu.
15
.
.
.
.
.
.