Table of Contents
Advertisement
ACT Fresnel 50 WW
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself!
Always let the installation be carried out by an authorized dealer!
Procedure:
●
If the device is lowered from the ceiling or high joists, professional trussing systems have to be used.
●
Use a clamp to mount the device with the mounting bracket to the trussing system.
●
The device must never be fixed swinging freely in the room.
●
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
●
If the barndoor or the color filter is installed, it must be secured with a safety cable.
●
When rigging, derigging or servicing the device, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.
Improper installation can cause serious injuries and/or damage of property!
Angle Adjustment
You can adjust the angle of the device with the adjustment handle (06).
01) Turn the adjustment handle (06) counterclockwise to release it.
02) Tilt the device at the desired angle (see Fig. 01).
03) Turn the adjustment handle (06) clockwise to tighten it. Make sure that the device cannot move
freely after the adjustment handle (06) is tightened.
Order code: 34011
5
Fig. 01
Advertisement
Table of Contents
