Mma Welding; Connecting The Electrode Holder And Workpiece Lead - EWM Pico 350 cel puls pws Operating Instructions Manual

Design and function

MMA welding

5.2 MMA welding
5.2.1

Connecting the electrode holder and workpiece lead

Risk of crushing and burns!
When changing stick electrodes there is a risk of crushing and burns!
• Wear appropriate and dry protective gloves.
• Use an insulated pair of tongs to remove the used stick electrode or to move welded work-
pieces.
The signal lights above the welding current sockets show the welding current polarity (+/-), depending on
the electrode type selected at the machine control.
Use the welding current polarity push-button (pole reversal) to reverse the welding current polarity (+/-)
without having to change the electrode holder or workpiece lead > see 5.6 chapter. This reversal can also
be effected using a suitable remote control (PWS).
The polarity cannot be reversed during welding.
Item Symbol
1
2
3
4
• Insert cable plug on the workpiece lead into the welding current socket "
the right.
• Insert cable plug on the electrode holder into the welding current socket "
the right.
26
Description 0
Workpiece
Connection socket, welding current (workpiece)
Electrode holder
Connection socket, welding current (electrode holder)
CAUTION
Figure 5-11
" and lock by turning to
" and lock by turning to
099-002061-EW501
05.05.2020