Machine Configuration Menu - EWM Pico 350 cel puls pws Operating Instructions Manual

Design and function

Machine configuration menu

5.10 Machine configuration menu
Display
42
ENTER
EXIT
Setting/selection
Calibration
The machine will be calibrated for approx 2 seconds each time it is switched on.
Exit the menu
Exit
Machine configuration
Settings for machine functions and parameter display
Welding current polarity switching
------- polarity switching at the RT PWS 1 19POL remote control (ex works)
------- polarity switching at the welding machine control
Time-based power-saving mode > see 5.9 chapter
Time to activation of the power-saving mode in case of inactivity.
Setting = disabled or numerical value 5-60 min..
Welding current actual value display > see 4.2.1 chapter
------- Actual value display
------- Nominal value display
Use of accessories
------- Operation with wire feeder
------ Operation with foot-operated remote control
Service menu
Any changes to the service menu should be agreed with the authorised service person-
nel.
Software version of the machine control
Version display
A
B
B B
A
A
B
B
Figure 5-37
1
NAVIGATION
A
B
B B
A A A
099-002061-EW501
05.05.2020